Hyperparameters and lags search: backtesting vs one-step-ahead¶
Hyperparameter and lag tuning involves systematically testing different values or combinations of hyperparameters (and/or lags) to find the optimal configuration that gives the best performance. The skforecast library provides two different methods to evaluate each candidate configuration:
Backtesting: In this method, the model predicts several steps ahead in each iteration, using the same forecast horizon and retraining frequency strategy that would be used if the model were deployed. This simulates a real forecasting scenario where the model is retrained and updated over time. More information here.
One-Step Ahead: Evaluates the model using only one-step-ahead predictions. This method is faster because it requires fewer iterations, but it only tests the model's performance in the immediate next time step ($t+1$).
Each method uses a different evaluation strategy, so they may produce different results. However, in the long run, both methods are expected to converge to similar selections of optimal hyperparameters. The one-step-ahead method is much faster than backtesting because it requires fewer iterations, but it only tests the model's performance in the immediate next time step. It is recommended to backtest the final model for a more accurate multi-step performance estimate.
The document compares the performance of these two methods when applied to various datasets and forecaster types. The process is outlined as follows:
Optimal hyperparameters and lags are identified through a search using both backtesting and one-step-ahead evaluation methods. This search is performed on the validation partition, and the best configuration is stored along with the time taken to complete the search.
Finally, the selected best configuration is evaluated on the test partition using a backtesting procedure.
It is important to note that the final evaluation is consistently performed using backtesting to simulate a real-world multi-step forecasting scenario.
Results¶
The results show a significant reduction in the time required to find the optimal configuration using the one-step-ahead method (top panel). However, the performance of the selected configuration on the test partition is similar for both methods (lower panel), with no clear winner. These results are consistent for both grid search and Bayesian search approaches.
✎ Note
The purpose of this analysis is to compare the time and forecasting performance of the two available evaluation methods, not to compare different forecasters.
Libraries and data¶
In [ ]:
Copied!
# Libraries
# ==============================================================================
import platform
import psutil
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
from time import time
from copy import copy
import sklearn
import skforecast
import lightgbm
from lightgbm import LGBMRegressor
from sklearn.linear_model import Ridge
from sklearn.preprocessing import StandardScaler
from skforecast.datasets import fetch_dataset
from skforecast.plot import set_dark_theme
from skforecast.recursive import ForecasterRecursive
from skforecast.direct import ForecasterDirect
from skforecast.model_selection import TimeSeriesFold, OneStepAheadFold
from skforecast.model_selection import grid_search_forecaster
from skforecast.model_selection import bayesian_search_forecaster
from skforecast.model_selection import backtesting_forecaster
from skforecast.recursive import ForecasterRecursiveMultiSeries
from skforecast.direct import ForecasterDirectMultiVariate
from skforecast.model_selection import backtesting_forecaster_multiseries
from skforecast.model_selection import grid_search_forecaster_multiseries
from skforecast.model_selection import bayesian_search_forecaster_multiseries
from skforecast.preprocessing import reshape_series_long_to_dict
from skforecast.preprocessing import reshape_exog_long_to_dict
# Warnings
# ==============================================================================
import warnings
from skforecast.exceptions import IgnoredArgumentWarning
warnings.filterwarnings('ignore')
warnings.simplefilter('ignore', category=IgnoredArgumentWarning)
# Libraries
# ==============================================================================
import platform
import psutil
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
from time import time
from copy import copy
import sklearn
import skforecast
import lightgbm
from lightgbm import LGBMRegressor
from sklearn.linear_model import Ridge
from sklearn.preprocessing import StandardScaler
from skforecast.datasets import fetch_dataset
from skforecast.plot import set_dark_theme
from skforecast.recursive import ForecasterRecursive
from skforecast.direct import ForecasterDirect
from skforecast.model_selection import TimeSeriesFold, OneStepAheadFold
from skforecast.model_selection import grid_search_forecaster
from skforecast.model_selection import bayesian_search_forecaster
from skforecast.model_selection import backtesting_forecaster
from skforecast.recursive import ForecasterRecursiveMultiSeries
from skforecast.direct import ForecasterDirectMultiVariate
from skforecast.model_selection import backtesting_forecaster_multiseries
from skforecast.model_selection import grid_search_forecaster_multiseries
from skforecast.model_selection import bayesian_search_forecaster_multiseries
from skforecast.preprocessing import reshape_series_long_to_dict
from skforecast.preprocessing import reshape_exog_long_to_dict
# Warnings
# ==============================================================================
import warnings
from skforecast.exceptions import IgnoredArgumentWarning
warnings.filterwarnings('ignore')
warnings.simplefilter('ignore', category=IgnoredArgumentWarning)
In [2]:
Copied!
# Versions
# ==============================================================================
print(f"Python version : {platform.python_version()}")
print(f"scikit-learn version: {sklearn.__version__}")
print(f"skforecast version : {skforecast.__version__}")
print(f"lightgbm version : {lightgbm.__version__}")
print(f"pandas version : {pd.__version__}")
print(f"numpy version : {np.__version__}")
print("")
# System information
# ==============================================================================
print(f"Machine type: {platform.machine()}")
print(f"Processor type: {platform.processor()}")
print(f"Platform type: {platform.platform()}")
print(f"Operating system: {platform.system()}")
print(f"Operating system release: {platform.release()}")
print(f"Operating system version: {platform.version()}")
print(f"Number of physical cores: {psutil.cpu_count(logical=False)}")
print(f"Number of logical cores: {psutil.cpu_count(logical=True)}")
# Versions
# ==============================================================================
print(f"Python version : {platform.python_version()}")
print(f"scikit-learn version: {sklearn.__version__}")
print(f"skforecast version : {skforecast.__version__}")
print(f"lightgbm version : {lightgbm.__version__}")
print(f"pandas version : {pd.__version__}")
print(f"numpy version : {np.__version__}")
print("")
# System information
# ==============================================================================
print(f"Machine type: {platform.machine()}")
print(f"Processor type: {platform.processor()}")
print(f"Platform type: {platform.platform()}")
print(f"Operating system: {platform.system()}")
print(f"Operating system release: {platform.release()}")
print(f"Operating system version: {platform.version()}")
print(f"Number of physical cores: {psutil.cpu_count(logical=False)}")
print(f"Number of logical cores: {psutil.cpu_count(logical=True)}")
Python version : 3.12.9 scikit-learn version: 1.5.2 skforecast version : 0.15.0 lightgbm version : 4.6.0 pandas version : 2.2.3 numpy version : 1.26.4 Machine type: x86_64 Processor type: x86_64 Platform type: Linux-5.15.0-1077-aws-x86_64-with-glibc2.31 Operating system: Linux Operating system release: 5.15.0-1077-aws Operating system version: #84~20.04.1-Ubuntu SMP Mon Jan 20 22:14:54 UTC 2025 Number of physical cores: 4 Number of logical cores: 8
In [ ]:
Copied!
# Import data
# ==============================================================================
data_bike = fetch_dataset('bike_sharing_extended_features', verbose=False)
data_sales = fetch_dataset(name="items_sales", verbose=False)
data_sales = data_sales * 100
data_sales['day_of_week'] = data_sales.index.dayofweek
data_website = fetch_dataset(name="website_visits", raw=True, verbose=False)
data_website['date'] = pd.to_datetime(data_website['date'], format='%d/%m/%y')
data_website = data_website.set_index('date')
data_website = data_website.asfreq('1D')
data_website = data_website.sort_index()
data_website['month'] = data_website.index.month
data_website['month_day'] = data_website.index.day
data_website['week_day'] = data_website.index.day_of_week
data_website = pd.get_dummies(data_website, columns=['month', 'week_day', 'month_day'], dtype='int64')
data_electricity = fetch_dataset(name='vic_electricity', raw=False, verbose=False)
data_electricity = data_electricity.drop(columns="Date")
data_electricity = (
data_electricity
.resample(rule="h", closed="left", label="right")
.agg({
"Demand": "mean",
"Temperature": "mean",
"Holiday": "mean",
})
)
data_electricity = data_electricity.loc['2012-01-01 00:00:00': '2013-12-30 23:00:00'].copy()
series_dict = pd.read_csv(
'https://raw.githubusercontent.com/skforecast/skforecast-datasets/main/data/demo_multi_series.csv'
)
exog_dict = pd.read_csv(
'https://raw.githubusercontent.com/skforecast/skforecast-datasets/main/data/demo_multi_series_exog.csv'
)
series_dict['timestamp'] = pd.to_datetime(series_dict['timestamp'])
exog_dict['timestamp'] = pd.to_datetime(exog_dict['timestamp'])
series_dict = reshape_series_long_to_dict(
data = series_dict,
series_id = 'series_id',
index = 'timestamp',
values = 'value',
freq = 'D'
)
exog_dict = reshape_exog_long_to_dict(
data = exog_dict,
series_id = 'series_id',
index = 'timestamp',
freq = 'D'
)
# Import data
# ==============================================================================
data_bike = fetch_dataset('bike_sharing_extended_features', verbose=False)
data_sales = fetch_dataset(name="items_sales", verbose=False)
data_sales = data_sales * 100
data_sales['day_of_week'] = data_sales.index.dayofweek
data_website = fetch_dataset(name="website_visits", raw=True, verbose=False)
data_website['date'] = pd.to_datetime(data_website['date'], format='%d/%m/%y')
data_website = data_website.set_index('date')
data_website = data_website.asfreq('1D')
data_website = data_website.sort_index()
data_website['month'] = data_website.index.month
data_website['month_day'] = data_website.index.day
data_website['week_day'] = data_website.index.day_of_week
data_website = pd.get_dummies(data_website, columns=['month', 'week_day', 'month_day'], dtype='int64')
data_electricity = fetch_dataset(name='vic_electricity', raw=False, verbose=False)
data_electricity = data_electricity.drop(columns="Date")
data_electricity = (
data_electricity
.resample(rule="h", closed="left", label="right")
.agg({
"Demand": "mean",
"Temperature": "mean",
"Holiday": "mean",
})
)
data_electricity = data_electricity.loc['2012-01-01 00:00:00': '2013-12-30 23:00:00'].copy()
series_dict = pd.read_csv(
'https://raw.githubusercontent.com/skforecast/skforecast-datasets/main/data/demo_multi_series.csv'
)
exog_dict = pd.read_csv(
'https://raw.githubusercontent.com/skforecast/skforecast-datasets/main/data/demo_multi_series_exog.csv'
)
series_dict['timestamp'] = pd.to_datetime(series_dict['timestamp'])
exog_dict['timestamp'] = pd.to_datetime(exog_dict['timestamp'])
series_dict = reshape_series_long_to_dict(
data = series_dict,
series_id = 'series_id',
index = 'timestamp',
values = 'value',
freq = 'D'
)
exog_dict = reshape_exog_long_to_dict(
data = exog_dict,
series_id = 'series_id',
index = 'timestamp',
freq = 'D'
)
Benchmark¶
In [4]:
Copied!
# Functions to compare results using backtesting and one step ahead
# ==============================================================================
def run_benchmark(
data,
forecaster_to_benchmark,
search_method = None,
lags_grid = None,
param_grid = None,
search_space = None,
end_train = None,
end_validation = None,
target = None,
exog_features = None,
steps = None,
metric = None
):
"""
Compare results of grid search and bayesian search using backtesting and one-step-ahead.
"""
# backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_train]),
steps = steps,
refit = False,
)
if search_method == 'grid_search':
results_1 = grid_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
else:
results_1, _ = bayesian_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_1, _ = backtesting_forecaster(
forecaster = forecaster,
y = data.loc[:, target],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
metric = metric,
verbose = False,
show_progress = False
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = len(data.loc[:end_train]))
if search_method == 'grid_search':
results_2 = grid_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False
)
else:
results_2, _ = bayesian_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
verbose = False,
show_progress = False
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_2, _ = backtesting_forecaster(
forecaster = forecaster,
y = data.loc[:, target],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
metric = metric,
verbose = False,
show_progress = False
)
print("-----------------")
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric}: {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric}: {metric_2.loc[0, metric]}")
return time_1, time_2, metric_1.loc[0, metric], metric_2.loc[0, metric]
# Functions to compare results using backtesting and one step ahead
# ==============================================================================
def run_benchmark_multiseries(
data = None,
forecaster_to_benchmark = None,
search_method = None,
lags_grid = None,
param_grid = None,
search_space = None,
end_train = None,
end_validation = None,
levels = None,
exog_features = None,
steps = None,
metric = None
):
"""
Compare results of grid search using backtesting and one-step-ahead.
"""
# Backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_train]),
steps = steps,
refit = False,
)
if search_method == 'grid_search':
results_1 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
levels = levels,
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
else:
results_1, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
levels = levels,
search_space = search_space,
cv = cv,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_1, _ = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:, levels],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = len(data.loc[:end_train]))
if search_method == 'grid_search':
results_2 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
levels = levels,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False
)
else:
results_2, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
levels = levels,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
verbose = False,
show_progress = False
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_2, _ = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:, levels],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
return time_1, time_2, metric_1.loc[0, metric], metric_2.loc[0, metric]
def summarize_results(results, metric, title, plot=True, save_plot=None, fig_size=(8, 4)):
"""
Summarize results of benchmark.
"""
results = pd.DataFrame(
results,
columns=[
"dataset",
"forecaster",
"time_search_backtesting",
"time_search_one_step",
"metric_backtesting",
"metric_one_step",
]
)
results['ratio_speed'] = (
results['time_search_backtesting'] / results['time_search_one_step']
).round(2)
results['ratio_metric'] = (
results['metric_backtesting'] / results['metric_one_step']
).round(2)
results["dataset_forecaster"] = (
results["dataset"]
+ " \n "
+ results["forecaster"].str.replace("Forecaster", "")
)
display(results)
if plot:
set_dark_theme()
fig, axs = plt.subplots(2, 1, figsize=fig_size, sharex=True)
results.plot.bar(
x='dataset_forecaster',
y=['time_search_backtesting', 'time_search_one_step'],
ax=axs[0],
)
axs[0].set_ylabel('time (s)')
axs[0].legend(["backtesting", "one-step-ahead"])
results.plot.bar(
x='dataset_forecaster',
y=['metric_backtesting', 'metric_one_step'],
ax=axs[1],
legend=False
)
axs[1].set_ylabel(f'{metric}')
axs[1].set_xlabel('')
plt.xticks(rotation=90)
plt.suptitle(title)
plt.tight_layout()
if save_plot:
plt.savefig(save_plot, dpi=300, bbox_inches='tight')
# Functions to compare results using backtesting and one step ahead
# ==============================================================================
def run_benchmark(
data,
forecaster_to_benchmark,
search_method = None,
lags_grid = None,
param_grid = None,
search_space = None,
end_train = None,
end_validation = None,
target = None,
exog_features = None,
steps = None,
metric = None
):
"""
Compare results of grid search and bayesian search using backtesting and one-step-ahead.
"""
# backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_train]),
steps = steps,
refit = False,
)
if search_method == 'grid_search':
results_1 = grid_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
else:
results_1, _ = bayesian_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_1, _ = backtesting_forecaster(
forecaster = forecaster,
y = data.loc[:, target],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
metric = metric,
verbose = False,
show_progress = False
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = len(data.loc[:end_train]))
if search_method == 'grid_search':
results_2 = grid_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False
)
else:
results_2, _ = bayesian_search_forecaster(
forecaster = forecaster,
y = data.loc[:end_validation, target],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
verbose = False,
show_progress = False
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_2, _ = backtesting_forecaster(
forecaster = forecaster,
y = data.loc[:, target],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
metric = metric,
verbose = False,
show_progress = False
)
print("-----------------")
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric}: {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric}: {metric_2.loc[0, metric]}")
return time_1, time_2, metric_1.loc[0, metric], metric_2.loc[0, metric]
# Functions to compare results using backtesting and one step ahead
# ==============================================================================
def run_benchmark_multiseries(
data = None,
forecaster_to_benchmark = None,
search_method = None,
lags_grid = None,
param_grid = None,
search_space = None,
end_train = None,
end_validation = None,
levels = None,
exog_features = None,
steps = None,
metric = None
):
"""
Compare results of grid search using backtesting and one-step-ahead.
"""
# Backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_train]),
steps = steps,
refit = False,
)
if search_method == 'grid_search':
results_1 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
levels = levels,
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
else:
results_1, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
levels = levels,
search_space = search_space,
cv = cv,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_1, _ = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:, levels],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = len(data.loc[:end_train]))
if search_method == 'grid_search':
results_2 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
levels = levels,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False
)
else:
results_2, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:end_validation, levels],
exog = data.loc[:end_validation, exog_features] if exog_features else None,
cv = cv,
levels = levels,
search_space = search_space,
metric = metric,
n_trials = 15,
random_state = 123,
return_best = False,
verbose = False,
show_progress = False
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = len(data.loc[:end_validation]),
steps = steps,
refit = False,
)
metric_2, _ = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = data.loc[:, levels],
exog = data.loc[:, exog_features] if exog_features else None,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
return time_1, time_2, metric_1.loc[0, metric], metric_2.loc[0, metric]
def summarize_results(results, metric, title, plot=True, save_plot=None, fig_size=(8, 4)):
"""
Summarize results of benchmark.
"""
results = pd.DataFrame(
results,
columns=[
"dataset",
"forecaster",
"time_search_backtesting",
"time_search_one_step",
"metric_backtesting",
"metric_one_step",
]
)
results['ratio_speed'] = (
results['time_search_backtesting'] / results['time_search_one_step']
).round(2)
results['ratio_metric'] = (
results['metric_backtesting'] / results['metric_one_step']
).round(2)
results["dataset_forecaster"] = (
results["dataset"]
+ " \n "
+ results["forecaster"].str.replace("Forecaster", "")
)
display(results)
if plot:
set_dark_theme()
fig, axs = plt.subplots(2, 1, figsize=fig_size, sharex=True)
results.plot.bar(
x='dataset_forecaster',
y=['time_search_backtesting', 'time_search_one_step'],
ax=axs[0],
)
axs[0].set_ylabel('time (s)')
axs[0].legend(["backtesting", "one-step-ahead"])
results.plot.bar(
x='dataset_forecaster',
y=['metric_backtesting', 'metric_one_step'],
ax=axs[1],
legend=False
)
axs[1].set_ylabel(f'{metric}')
axs[1].set_xlabel('')
plt.xticks(rotation=90)
plt.suptitle(title)
plt.tight_layout()
if save_plot:
plt.savefig(save_plot, dpi=300, bbox_inches='tight')
Grid search¶
In [5]:
Copied!
# Results
# ==============================================================================
results_grid_search = []
metric = 'mean_absolute_error'
# Results
# ==============================================================================
results_grid_search = []
metric = 'mean_absolute_error'
In [6]:
Copied!
# Dataset bike_sharing_extended_features - ForecasterRecursive
# ==============================================================================
end_train = '2012-03-31 23:59:00'
end_validation = '2012-08-31 23:59:00'
exog_features = [
'month_sin', 'month_cos', 'week_of_year_sin', 'week_of_year_cos', 'week_day_sin',
'week_day_cos', 'hour_day_sin', 'hour_day_cos', 'sunrise_hour_sin', 'sunrise_hour_cos',
'sunset_hour_sin', 'sunset_hour_cos', 'holiday_previous_day', 'holiday_next_day',
'temp_roll_mean_1_day', 'temp_roll_mean_7_day', 'temp_roll_max_1_day',
'temp_roll_min_1_day', 'temp_roll_max_7_day', 'temp_roll_min_7_day',
'temp', 'holiday'
]
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {
'n_estimators': [100, 200],
'max_depth': [3, 5],
'learning_rate': [0.01, 0.1]
}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'bike',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset bike_sharing_extended_features - ForecasterRecursive
# ==============================================================================
end_train = '2012-03-31 23:59:00'
end_validation = '2012-08-31 23:59:00'
exog_features = [
'month_sin', 'month_cos', 'week_of_year_sin', 'week_of_year_cos', 'week_day_sin',
'week_day_cos', 'hour_day_sin', 'hour_day_cos', 'sunrise_hour_sin', 'sunrise_hour_cos',
'sunset_hour_sin', 'sunset_hour_cos', 'holiday_previous_day', 'holiday_next_day',
'temp_roll_mean_1_day', 'temp_roll_mean_7_day', 'temp_roll_max_1_day',
'temp_roll_min_1_day', 'temp_roll_max_7_day', 'temp_roll_min_7_day',
'temp', 'holiday'
]
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {
'n_estimators': [100, 200],
'max_depth': [3, 5],
'learning_rate': [0.01, 0.1]
}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'bike',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 87.1414406299591
Execution time one step ahead: 7.115885972976685
Same lags : False
Same params : True
Method: backtesting
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'learning_rate': 0.1, 'max_depth': 3, 'n_estimators': 200}
mean_absolute_error: 58.276762590192014
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'learning_rate': 0.1, 'max_depth': 3, 'n_estimators': 200}
mean_absolute_error: 64.04254202108999
In [7]:
Copied!
# Dataset bike_sharing_extended_features - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'bike',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset bike_sharing_extended_features - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'bike',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 67.9793062210083
Execution time one step ahead: 1.2969775199890137
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 112.88378916846884}
mean_absolute_error: 79.14111581771634
Method: one step ahead
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'alpha': 12.742749857031322}
mean_absolute_error: 111.95615163625295
In [8]:
Copied!
# Dataset website_visits - ForecasterRecursive
# ==============================================================================
end_train = '2021-03-30 23:59:00'
end_validation = '2021-06-30 23:59:00'
exog_features = [col for col in data_website.columns if col.startswith(('month_', 'week_day_', 'month_day_'))]
forecaster = ForecasterRecursive(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_grid_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset website_visits - ForecasterRecursive
# ==============================================================================
end_train = '2021-03-30 23:59:00'
end_validation = '2021-06-30 23:59:00'
exog_features = [col for col in data_website.columns if col.startswith(('month_', 'week_day_', 'month_day_'))]
forecaster = ForecasterRecursive(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_grid_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 5.345601797103882
Execution time one step ahead: 0.4459536075592041
Same lags : True
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 6.158482110660261}
mean_absolute_error: 162.11396980738706
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 2.976351441631316}
mean_absolute_error: 162.3516346601722
In [9]:
Copied!
# Dataset website_visits - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
steps = 24,
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset website_visits - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
steps = 24,
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 8.905436277389526
Execution time one step ahead: 0.7390425205230713
Same lags : True
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 6.158482110660261}
mean_absolute_error: 277.8362513175169
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 1.438449888287663}
mean_absolute_error: 236.28560218972729
In [10]:
Copied!
# Dataset vic_electricity - ForecasterRecursive
# ==============================================================================
end_train = '2013-06-30 23:59:00'
end_validation = '2013-11-30 23:59:00'
exog_features = ['Temperature', 'Holiday']
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {
'n_estimators': [100, 200],
'max_depth': [3, 5],
'learning_rate': [0.01, 0.1]
}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset vic_electricity - ForecasterRecursive
# ==============================================================================
end_train = '2013-06-30 23:59:00'
end_validation = '2013-11-30 23:59:00'
exog_features = ['Temperature', 'Holiday']
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {
'n_estimators': [100, 200],
'max_depth': [3, 5],
'learning_rate': [0.01, 0.1]
}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 83.48313307762146
Execution time one step ahead: 6.249357223510742
Same lags : False
Same params : True
Method: backtesting
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'learning_rate': 0.1, 'max_depth': 5, 'n_estimators': 200}
mean_absolute_error: 194.83553235066182
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'learning_rate': 0.1, 'max_depth': 5, 'n_estimators': 200}
mean_absolute_error: 188.8782299908785
In [11]:
Copied!
# Dataset vic_electricity - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset vic_electricity - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
param_grid = {'alpha': np.logspace(-3, 3, 20)}
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_grid_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
-----------------
Benchmark results
-----------------
Execution time backtesting : 62.373592138290405
Execution time one step ahead: 1.0504238605499268
Same lags : True
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 6.158482110660261}
mean_absolute_error: 304.22332781257694
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 1.438449888287663}
mean_absolute_error: 301.7070971763055
In [12]:
Copied!
# Dataset sales - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2014-05-15 23:59:00'
end_validation = '2014-07-15 23:59:00'
levels = ['item_1', 'item_2', 'item_3']
exog_features = ['day_of_week']
forecaster = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = {
'24 lags': 24,
'48 lags': 48
}
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 36,
metric = metric
)
results_grid_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset sales - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2014-05-15 23:59:00'
end_validation = '2014-07-15 23:59:00'
levels = ['item_1', 'item_2', 'item_3']
exog_features = ['day_of_week']
forecaster = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = {
'24 lags': 24,
'48 lags': 48
}
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 36,
metric = metric
)
results_grid_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
Benchmark results
-----------------
Execution time backtesting : 1.6175434589385986
Execution time one step ahead: 0.9103469848632812
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24]
params : {'max_depth': 7, 'n_estimators': 200}
137.16940500432474
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48]
params : {'max_depth': 3, 'n_estimators': 50}
134.76669158338447
In [13]:
Copied!
# Dataset sales - ForecasterDirectMultiVariate
# ==============================================================================
forecaster = ForecasterDirectMultiVariate(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
steps = 5,
level = 'item_1',
transformer_series = None,
transformer_exog = None,
weight_func = None,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = {
'24 lags': 24,
'48 lags': 48
}
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 5,
metric = metric
)
results_grid_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset sales - ForecasterDirectMultiVariate
# ==============================================================================
forecaster = ForecasterDirectMultiVariate(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
steps = 5,
level = 'item_1',
transformer_series = None,
transformer_exog = None,
weight_func = None,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = {
'24 lags': 24,
'48 lags': 48
}
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'grid_search',
lags_grid = lags_grid,
param_grid = param_grid,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 5,
metric = metric
)
results_grid_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
Benchmark results
-----------------
Execution time backtesting : 6.571660757064819
Execution time one step ahead: 1.1719706058502197
Same lags : False
Same params : True
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24]
params : {'max_depth': 7, 'n_estimators': 50}
100.16441146410313
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48]
params : {'max_depth': 7, 'n_estimators': 50}
95.20010578089475
In [14]:
Copied!
# Dataset series_dict - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2016-05-31 23:59:00'
end_validation = '2016-07-31 23:59:00'
levels = ['id_1000', 'id_1001', 'id_1002', 'id_1003', 'id_1004']
series_dict_train = {k: v.loc[: end_train,] for k, v in series_dict.items()}
exog_dict_train = {k: v.loc[: end_train,] for k, v in exog_dict.items()}
series_dict_test = {k: v.loc[end_train:,] for k, v in series_dict.items()}
exog_dict_test = {k: v.loc[end_train:,] for k, v in exog_dict.items()}
forecaster_to_benchmark = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [7, 14]
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
# Backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = 100,
steps = 24,
refit = False
)
results_1 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False
)
metric_1, pred_1 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = 100)
results_2 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
levels = levels,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False
)
metric_2, pred_2 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
results_grid_search.append([
'series_dict',
type(forecaster).__name__,
time_1,
time_2,
metric_1.loc[0, metric],
metric_2.loc[0, metric],
])
# Dataset series_dict - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2016-05-31 23:59:00'
end_validation = '2016-07-31 23:59:00'
levels = ['id_1000', 'id_1001', 'id_1002', 'id_1003', 'id_1004']
series_dict_train = {k: v.loc[: end_train,] for k, v in series_dict.items()}
exog_dict_train = {k: v.loc[: end_train,] for k, v in exog_dict.items()}
series_dict_test = {k: v.loc[end_train:,] for k, v in series_dict.items()}
exog_dict_test = {k: v.loc[end_train:,] for k, v in exog_dict.items()}
forecaster_to_benchmark = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [7, 14]
param_grid = {
'n_estimators': [50, 200],
'max_depth': [3, 7]
}
# Backtesting
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = TimeSeriesFold(
initial_train_size = 100,
steps = 24,
refit = False
)
results_1 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False
)
metric_1, pred_1 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
start = time()
cv = OneStepAheadFold(initial_train_size = 100)
results_2 = grid_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
levels = levels,
param_grid = param_grid,
lags_grid = lags_grid,
metric = metric,
return_best = False,
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False
)
metric_2, pred_2 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
results_grid_search.append([
'series_dict',
type(forecaster).__name__,
time_1,
time_2,
metric_1.loc[0, metric],
metric_2.loc[0, metric],
])
Benchmark results
-----------------
Execution time backtesting : 1.8693697452545166
Execution time one step ahead: 0.3610079288482666
Same lags : False
Same params : False
Method: backtesting
lags : [1 2 3 4 5 6 7]
params : {'max_depth': 3, 'n_estimators': 50}
180.46141171905165
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'max_depth': 7, 'n_estimators': 50}
164.23659500870002
In [15]:
Copied!
# Results
# ==============================================================================
summarize_results(
results = results_grid_search,
metric = metric,
plot = True,
fig_size = (8, 6),
title = 'Grid search using backtesting vs one-step-ahead',
save_plot = "../img/grid_search_benchmarck.png"
)
# Results
# ==============================================================================
summarize_results(
results = results_grid_search,
metric = metric,
plot = True,
fig_size = (8, 6),
title = 'Grid search using backtesting vs one-step-ahead',
save_plot = "../img/grid_search_benchmarck.png"
)
| dataset | forecaster | time_search_backtesting | time_search_one_step | metric_backtesting | metric_one_step | ratio_speed | ratio_metric | dataset_forecaster | |
|---|---|---|---|---|---|---|---|---|---|
| 0 | bike | ForecasterRecursive | 87.141441 | 7.115886 | 58.276763 | 64.042542 | 12.25 | 0.91 | bike \n Recursive |
| 1 | bike | ForecasterDirect | 67.979306 | 1.296978 | 79.141116 | 111.956152 | 52.41 | 0.71 | bike \n Direct |
| 2 | website | ForecasterRecursive | 5.345602 | 0.445954 | 162.113970 | 162.351635 | 11.99 | 1.00 | website \n Recursive |
| 3 | website | ForecasterDirect | 8.905436 | 0.739043 | 277.836251 | 236.285602 | 12.05 | 1.18 | website \n Direct |
| 4 | electricity | ForecasterRecursive | 83.483133 | 6.249357 | 194.835532 | 188.878230 | 13.36 | 1.03 | electricity \n Recursive |
| 5 | electricity | ForecasterDirect | 62.373592 | 1.050424 | 304.223328 | 301.707097 | 59.38 | 1.01 | electricity \n Direct |
| 6 | sales | ForecasterRecursiveMultiSeries | 1.617543 | 0.910347 | 137.169405 | 134.766692 | 1.78 | 1.02 | sales \n RecursiveMultiSeries |
| 7 | sales | ForecasterDirectMultiVariate | 6.571661 | 1.171971 | 100.164411 | 95.200106 | 5.61 | 1.05 | sales \n DirectMultiVariate |
| 8 | series_dict | ForecasterRecursiveMultiSeries | 1.869370 | 0.361008 | 180.461412 | 164.236595 | 5.18 | 1.10 | series_dict \n RecursiveMultiSeries |
Bayesian search¶
In [16]:
Copied!
# Table to store results
# ==============================================================================
results_bayesian_search = []
metric = 'mean_absolute_error'
# Table to store results
# ==============================================================================
results_bayesian_search = []
metric = 'mean_absolute_error'
In [17]:
Copied!
# Dataset bike_sharing_extended_features - ForecasterRecursive
# ==============================================================================
end_train = '2012-03-31 23:59:00'
end_validation = '2012-08-31 23:59:00'
exog_features = [
'month_sin', 'month_cos', 'week_of_year_sin', 'week_of_year_cos', 'week_day_sin',
'week_day_cos', 'hour_day_sin', 'hour_day_cos', 'sunrise_hour_sin', 'sunrise_hour_cos',
'sunset_hour_sin', 'sunset_hour_cos', 'holiday_previous_day', 'holiday_next_day',
'temp_roll_mean_1_day', 'temp_roll_mean_7_day', 'temp_roll_max_1_day',
'temp_roll_min_1_day', 'temp_roll_max_7_day', 'temp_roll_min_7_day',
'temp', 'holiday'
]
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 400, 1200, step=100),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'gamma' : trial.suggest_float('gamma', 0, 1),
'reg_alpha' : trial.suggest_float('reg_alpha', 0, 1),
'reg_lambda' : trial.suggest_float('reg_lambda', 0, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'bike_sharing',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset bike_sharing_extended_features - ForecasterRecursive
# ==============================================================================
end_train = '2012-03-31 23:59:00'
end_validation = '2012-08-31 23:59:00'
exog_features = [
'month_sin', 'month_cos', 'week_of_year_sin', 'week_of_year_cos', 'week_day_sin',
'week_day_cos', 'hour_day_sin', 'hour_day_cos', 'sunrise_hour_sin', 'sunrise_hour_cos',
'sunset_hour_sin', 'sunset_hour_cos', 'holiday_previous_day', 'holiday_next_day',
'temp_roll_mean_1_day', 'temp_roll_mean_7_day', 'temp_roll_max_1_day',
'temp_roll_min_1_day', 'temp_roll_max_7_day', 'temp_roll_min_7_day',
'temp', 'holiday'
]
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 400, 1200, step=100),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'gamma' : trial.suggest_float('gamma', 0, 1),
'reg_alpha' : trial.suggest_float('reg_alpha', 0, 1),
'reg_lambda' : trial.suggest_float('reg_lambda', 0, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'bike_sharing',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 87.15898752212524
Execution time one step ahead: 27.95840358734131
Same lags : True
Same params : True
Method: backtesting
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'n_estimators': 1200, 'max_depth': 10, 'learning_rate': 0.017833474222028703, 'gamma': 0.2285821738161964, 'reg_alpha': 0.2379772800670556, 'reg_lambda': 0.9887301767538853}
mean_absolute_error: 55.80577702511616
Method: one step ahead
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'n_estimators': 1200, 'max_depth': 10, 'learning_rate': 0.017833474222028703, 'gamma': 0.2285821738161964, 'reg_alpha': 0.2379772800670556, 'reg_lambda': 0.9887301767538853}
mean_absolute_error: 55.80577702511616
In [18]:
Copied!
# Dataset bike_sharing_extended_features - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'bike_sharing',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset bike_sharing_extended_features - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
steps = 24,
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_bike,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'bike_sharing',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 17.606075286865234
Execution time one step ahead: 0.9842092990875244
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 121.0898788312409}
mean_absolute_error: 79.1498337214025
Method: one step ahead
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'alpha': 15.094374246471325}
mean_absolute_error: 111.96208734026862
In [19]:
Copied!
# Dataset website_visits - ForecasterRecursive
# ==============================================================================
end_train = '2021-03-30 23:59:00'
end_validation = '2021-06-30 23:59:00'
exog_features = [col for col in data_website.columns if col.startswith(('month_', 'week_day_', 'month_day_'))]
forecaster = ForecasterRecursive(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_bayesian_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset website_visits - ForecasterRecursive
# ==============================================================================
end_train = '2021-03-30 23:59:00'
end_validation = '2021-06-30 23:59:00'
exog_features = [col for col in data_website.columns if col.startswith(('month_', 'week_day_', 'month_day_'))]
forecaster = ForecasterRecursive(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10
)
lags_grid = [7, 14, 21, [7, 14, 21]]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_bayesian_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 1.0920460224151611
Execution time one step ahead: 0.26500821113586426
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21]
params : {'alpha': 0.07474245141964296}
mean_absolute_error: 136.76802274106467
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 0.03182234592129467}
mean_absolute_error: 173.5282998809151
In [20]:
Copied!
# Dataset website_visits - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10,
steps = 7
)
lags_grid = [7, 14, 21, [7, 14, 21]]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_bayesian_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset website_visits - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10,
steps = 7
)
lags_grid = [7, 14, 21, [7, 14, 21]]
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_website,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'users',
exog_features = exog_features,
steps = 7,
metric = metric
)
results_bayesian_search.append([
'website',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 1.5587255954742432
Execution time one step ahead: 0.3095226287841797
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21]
params : {'alpha': 0.07474245141964296}
mean_absolute_error: 139.40123604696382
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'alpha': 0.03182234592129467}
mean_absolute_error: 153.6723680506666
In [21]:
Copied!
# Dataset vic_electricity - ForecasterRecursive
# ==============================================================================
end_train = '2013-06-30 23:59:00'
end_validation = '2013-11-30 23:59:00'
exog_features = ['Temperature', 'Holiday']
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 400, 1200, step=100),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'gamma' : trial.suggest_float('gamma', 0, 1),
'reg_alpha' : trial.suggest_float('reg_alpha', 0, 1),
'reg_lambda' : trial.suggest_float('reg_lambda', 0, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset vic_electricity - ForecasterRecursive
# ==============================================================================
end_train = '2013-06-30 23:59:00'
end_validation = '2013-11-30 23:59:00'
exog_features = ['Temperature', 'Holiday']
forecaster = ForecasterRecursive(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 10
)
lags_grid = [48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169)]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 400, 1200, step=100),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'gamma' : trial.suggest_float('gamma', 0, 1),
'reg_alpha' : trial.suggest_float('reg_alpha', 0, 1),
'reg_lambda' : trial.suggest_float('reg_lambda', 0, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 90.56433486938477
Execution time one step ahead: 24.597376823425293
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'n_estimators': 1200, 'max_depth': 8, 'learning_rate': 0.020288327487155415, 'gamma': 0.9893221948178936, 'reg_alpha': 0.0026751307734329544, 'reg_lambda': 0.0033431281459104997}
mean_absolute_error: 196.74829952595292
Method: one step ahead
lags : [ 1 2 3 23 24 25 167 168 169]
params : {'n_estimators': 1200, 'max_depth': 10, 'learning_rate': 0.056896300053531614, 'gamma': 0.2725691628660212, 'reg_alpha': 0.24605588251006993, 'reg_lambda': 0.9687485406819449}
mean_absolute_error: 191.37491441780287
In [22]:
Copied!
# Dataset vic_electricity - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10,
steps = 24
)
lags_grid = (48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169))
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset vic_electricity - ForecasterDirect
# ==============================================================================
forecaster = ForecasterDirect(
regressor = Ridge(random_state=123),
transformer_y = StandardScaler(),
lags = 10,
steps = 24
)
lags_grid = (48, 72, (1, 2, 3, 23, 24, 25, 167, 168, 169))
def search_space(trial):
search_space = {
'alpha': trial.suggest_float('alpha', 0.001, 1000, log=True),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark(
data = data_electricity,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
target = 'Demand',
exog_features = exog_features,
steps = 24,
metric = metric
)
results_bayesian_search.append([
'electricity',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
-----------------
Benchmark results
-----------------
Execution time backtesting : 16.454455375671387
Execution time one step ahead: 0.6429948806762695
Same lags : True
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 16.432489069228232}
mean_absolute_error: 307.13365278620506
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'alpha': 0.36149961722510493}
mean_absolute_error: 300.87028133154746
In [23]:
Copied!
# Dataset sales - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2014-05-15 23:59:00'
end_validation = '2014-07-15 23:59:00'
levels = ['item_1', 'item_2', 'item_3']
exog_features = ['day_of_week']
forecaster = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [48, 72]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 36,
metric = metric
)
results_bayesian_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset sales - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2014-05-15 23:59:00'
end_validation = '2014-07-15 23:59:00'
levels = ['item_1', 'item_2', 'item_3']
exog_features = ['day_of_week']
forecaster = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [48, 72]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 36,
metric = metric
)
results_bayesian_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
Benchmark results
-----------------
Execution time backtesting : 3.746009349822998
Execution time one step ahead: 2.683635950088501
Same lags : True
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48]
params : {'n_estimators': 199, 'max_depth': 3, 'learning_rate': 0.01901626315047264}
135.45451272241843
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48]
params : {'n_estimators': 198, 'max_depth': 3, 'learning_rate': 0.06045266837878549}
123.59899056676193
In [24]:
Copied!
# Dataset sales - ForecasterDirectMultiVariate
# ==============================================================================
forecaster = ForecasterDirectMultiVariate(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
steps = 5,
level = 'item_1',
transformer_series = None,
transformer_exog = None,
weight_func = None,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [48, 72]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 5,
metric = metric
)
results_bayesian_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
# Dataset sales - ForecasterDirectMultiVariate
# ==============================================================================
forecaster = ForecasterDirectMultiVariate(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
steps = 5,
level = 'item_1',
transformer_series = None,
transformer_exog = None,
weight_func = None,
fit_kwargs = None,
forecaster_id = None
)
lags_grid = [48, 72]
def search_space(trial):
search_space = {
'n_estimators' : trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 10, step=1),
'learning_rate': trial.suggest_float('learning_rate', 0.01, 1),
'lags' : trial.suggest_categorical('lags', lags_grid)
}
return search_space
time_1, time_2, metric_1, metric_2 = run_benchmark_multiseries(
data = data_sales,
forecaster_to_benchmark = forecaster,
search_method = 'bayesian_search',
search_space = search_space,
end_train = end_train,
end_validation = end_validation,
levels = levels,
exog_features = exog_features,
steps = 5,
metric = metric
)
results_bayesian_search.append([
'sales',
type(forecaster).__name__,
time_1,
time_2,
metric_1,
metric_2,
])
╭─────────────────────────────── IgnoredArgumentWarning ───────────────────────────────╮ │ `levels` argument have no use when the forecaster is of type │ │ `ForecasterDirectMultiVariate`. The level of this forecaster is 'item_1', to predict │ │ another level, change the `level` argument when initializing the forecaster. │ │ │ │ │ │ Category : IgnoredArgumentWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:891 │ │ Suppress : warnings.simplefilter('ignore', category=IgnoredArgumentWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── IgnoredArgumentWarning ───────────────────────────────╮ │ `levels` argument have no use when the forecaster is of type │ │ `ForecasterDirectMultiVariate`. The level of this forecaster is 'item_1', to predict │ │ another level, change the `level` argument when initializing the forecaster. │ │ │ │ │ │ Category : IgnoredArgumentWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:891 │ │ Suppress : warnings.simplefilter('ignore', category=IgnoredArgumentWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────── OneStepAheadValidationWarning ────────────────────────────╮ │ One-step-ahead predictions are used for faster model comparison, but they may not │ │ fully represent multi-step prediction performance. It is recommended to backtest the │ │ final model for a more accurate multi-step performance estimate. │ │ │ │ Category : OneStepAheadValidationWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:675 │ │ Suppress : warnings.simplefilter('ignore', category=OneStepAheadValidationWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── IgnoredArgumentWarning ───────────────────────────────╮ │ `levels` argument have no use when the forecaster is of type │ │ `ForecasterDirectMultiVariate`. The level of this forecaster is 'item_1', to predict │ │ another level, change the `level` argument when initializing the forecaster. │ │ │ │ │ │ Category : IgnoredArgumentWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:891 │ │ Suppress : warnings.simplefilter('ignore', category=IgnoredArgumentWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
╭─────────────────────────────── IgnoredArgumentWarning ───────────────────────────────╮ │ `levels` argument have no use when the forecaster is of type │ │ `ForecasterDirectMultiVariate`. The level of this forecaster is 'item_1', to predict │ │ another level, change the `level` argument when initializing the forecaster. │ │ │ │ │ │ Category : IgnoredArgumentWarning │ │ Location : │ │ /home/ubuntu/anaconda3/envs/skforecast_15_py12/lib/python3.12/site-packages/skforeca │ │ st/model_selection/_utils.py:891 │ │ Suppress : warnings.simplefilter('ignore', category=IgnoredArgumentWarning) │ ╰──────────────────────────────────────────────────────────────────────────────────────╯
Benchmark results
-----------------
Execution time backtesting : 18.90007495880127
Execution time one step ahead: 4.8505072593688965
Same lags : False
Same params : False
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48]
params : {'n_estimators': 178, 'max_depth': 4, 'learning_rate': 0.029392307095288957}
98.66981600939468
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72]
params : {'n_estimators': 98, 'max_depth': 5, 'learning_rate': 0.23598059857016607}
101.07276932380157
In [25]:
Copied!
# Dataset series_dict - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2016-05-31 23:59:00'
end_validation = '2016-07-31 23:59:00'
levels = ['id_1000', 'id_1001', 'id_1002', 'id_1003', 'id_1004']
series_dict_train = {k: v.loc[: end_train,] for k, v in series_dict.items()}
exog_dict_train = {k: v.loc[: end_train,] for k, v in exog_dict.items()}
series_dict_test = {k: v.loc[end_train:,] for k, v in series_dict.items()}
exog_dict_test = {k: v.loc[end_train:,] for k, v in exog_dict.items()}
forecaster_to_benchmark = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
def search_space(trial):
search_space = {
'n_estimators': trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 7, step=1),
'lags' : trial.suggest_categorical('lags', [7, 14])
}
return search_space
# Backtesting
forecaster = copy(forecaster_to_benchmark)
cv = TimeSeriesFold(
initial_train_size = 100,
steps = 24,
refit = False,
)
start = time()
results_1, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
search_space = search_space,
n_trials = 10,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False,
)
metric_1, pred_1 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
cv = OneStepAheadFold(initial_train_size = 100)
start = time()
results_2, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
levels = levels,
search_space = search_space,
n_trials = 10,
metric = metric,
return_best = False,
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False,
)
metric_2, pred_2 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
results_bayesian_search.append([
'series_dict',
type(forecaster).__name__,
time_1,
time_2,
metric_1.loc[0, metric],
metric_2.loc[0, metric],
])
# Dataset series_dict - ForecasterRecursiveMultiSeries
# ==============================================================================
end_train = '2016-05-31 23:59:00'
end_validation = '2016-07-31 23:59:00'
levels = ['id_1000', 'id_1001', 'id_1002', 'id_1003', 'id_1004']
series_dict_train = {k: v.loc[: end_train,] for k, v in series_dict.items()}
exog_dict_train = {k: v.loc[: end_train,] for k, v in exog_dict.items()}
series_dict_test = {k: v.loc[end_train:,] for k, v in series_dict.items()}
exog_dict_test = {k: v.loc[end_train:,] for k, v in exog_dict.items()}
forecaster_to_benchmark = ForecasterRecursiveMultiSeries(
regressor = LGBMRegressor(random_state=123, verbose=-1),
lags = 24,
encoding = "ordinal",
transformer_series = None,
transformer_exog = None,
weight_func = None,
series_weights = None,
differentiation = None,
dropna_from_series = False,
fit_kwargs = None,
forecaster_id = None
)
def search_space(trial):
search_space = {
'n_estimators': trial.suggest_int('n_estimators', 50, 200),
'max_depth' : trial.suggest_int('max_depth', 3, 7, step=1),
'lags' : trial.suggest_categorical('lags', [7, 14])
}
return search_space
# Backtesting
forecaster = copy(forecaster_to_benchmark)
cv = TimeSeriesFold(
initial_train_size = 100,
steps = 24,
refit = False,
)
start = time()
results_1, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
search_space = search_space,
n_trials = 10,
metric = metric,
return_best = False,
n_jobs = 'auto',
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_1 = end - start
best_params = results_1.loc[0, 'params']
best_lags = results_1.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False,
)
metric_1, pred_1 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
# One step ahead
forecaster = copy(forecaster_to_benchmark)
cv = OneStepAheadFold(initial_train_size = 100)
start = time()
results_2, _ = bayesian_search_forecaster_multiseries(
forecaster = forecaster,
series = {k: v.loc[: end_validation,] for k, v in series_dict.items()},
exog = {k: v.loc[: end_validation,] for k, v in exog_dict.items()},
cv = cv,
levels = levels,
search_space = search_space,
n_trials = 10,
metric = metric,
return_best = False,
verbose = False,
show_progress = False,
suppress_warnings = True
)
end = time()
time_2 = end - start
best_params = results_2.loc[0, 'params']
best_lags = results_2.loc[0, 'lags']
forecaster.set_params(best_params)
forecaster.set_lags(lags=best_lags)
cv = TimeSeriesFold(
initial_train_size = 213,
steps = 24,
refit = False,
)
metric_2, pred_2 = backtesting_forecaster_multiseries(
forecaster = forecaster,
series = series_dict,
exog = exog_dict,
cv = cv,
levels = levels,
metric = metric,
verbose = False,
show_progress = False,
suppress_warnings = True
)
print("Benchmark results")
print("-----------------")
print('Execution time backtesting :', time_1)
print('Execution time one step ahead:', time_2)
print(f"Same lags : {np.array_equal(results_1.loc[0, 'lags'], results_2.loc[0, 'lags'])}")
print(f"Same params : {results_1.loc[0, 'params'] == results_2.loc[0, 'params']}")
print("")
print("Method: backtesting")
print(f" lags : {results_1.loc[0, 'lags']}")
print(f" params : {results_1.loc[0, 'params']}")
print(f" {metric_1.loc[0, metric]}")
print("")
print("Method: one step ahead")
print(f" lags : {results_2.loc[0, 'lags']}")
print(f" params : {results_2.loc[0, 'params']}")
print(f" {metric_2.loc[0, metric]}")
results_bayesian_search.append([
'series_dict',
type(forecaster).__name__,
time_1,
time_2,
metric_1.loc[0, metric],
metric_2.loc[0, metric],
])
Benchmark results
-----------------
Execution time backtesting : 2.2047343254089355
Execution time one step ahead: 0.6358184814453125
Same lags : True
Same params : True
Method: backtesting
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'n_estimators': 77, 'max_depth': 3}
208.60243551060555
Method: one step ahead
lags : [ 1 2 3 4 5 6 7 8 9 10 11 12 13 14]
params : {'n_estimators': 77, 'max_depth': 3}
208.60243551060555
In [26]:
Copied!
# Results
# ==============================================================================
summarize_results(
results = results_bayesian_search,
metric = metric,
plot = True,
fig_size = (8, 6),
title = 'Bayesian search using backtesting vs one-step-ahead',
save_plot = "../img/bayesian_search_benchmarck.png"
)
# Results
# ==============================================================================
summarize_results(
results = results_bayesian_search,
metric = metric,
plot = True,
fig_size = (8, 6),
title = 'Bayesian search using backtesting vs one-step-ahead',
save_plot = "../img/bayesian_search_benchmarck.png"
)
| dataset | forecaster | time_search_backtesting | time_search_one_step | metric_backtesting | metric_one_step | ratio_speed | ratio_metric | dataset_forecaster | |
|---|---|---|---|---|---|---|---|---|---|
| 0 | bike_sharing | ForecasterRecursive | 87.158988 | 27.958404 | 55.805777 | 55.805777 | 3.12 | 1.00 | bike_sharing \n Recursive |
| 1 | bike_sharing | ForecasterDirect | 17.606075 | 0.984209 | 79.149834 | 111.962087 | 17.89 | 0.71 | bike_sharing \n Direct |
| 2 | website | ForecasterRecursive | 1.092046 | 0.265008 | 136.768023 | 173.528300 | 4.12 | 0.79 | website \n Recursive |
| 3 | website | ForecasterDirect | 1.558726 | 0.309523 | 139.401236 | 153.672368 | 5.04 | 0.91 | website \n Direct |
| 4 | electricity | ForecasterRecursive | 90.564335 | 24.597377 | 196.748300 | 191.374914 | 3.68 | 1.03 | electricity \n Recursive |
| 5 | electricity | ForecasterDirect | 16.454455 | 0.642995 | 307.133653 | 300.870281 | 25.59 | 1.02 | electricity \n Direct |
| 6 | sales | ForecasterRecursiveMultiSeries | 3.746009 | 2.683636 | 135.454513 | 123.598991 | 1.40 | 1.10 | sales \n RecursiveMultiSeries |
| 7 | sales | ForecasterDirectMultiVariate | 18.900075 | 4.850507 | 98.669816 | 101.072769 | 3.90 | 0.98 | sales \n DirectMultiVariate |
| 8 | series_dict | ForecasterRecursiveMultiSeries | 2.204734 | 0.635818 | 208.602436 | 208.602436 | 3.47 | 1.00 | series_dict \n RecursiveMultiSeries |
